Technical specifications
Overall dimensions: | Length ca. 5.700 mm. | Width ca. 3.700 mm. | Height ca. 2500 mm. |
Absorbed power: | 400 V 3 phases + neutral + ground 50Hz KW 25 |
Air: | 6 Bar 20 NL |
Max work piece standard: | 1500×600 mm. |
Water recycling: | Litres 10 – 12 / min. |
Weight: | T 4,5 |
Note:
Grinding disk wear and work time are conditional upon the degree of finishing and deformation of the work pieces.
Work pieces:
Under countertop basin, In countertop Basin
Description
The machine is made up of a trolley, which moves horizontally and by a hone, which moves transversally.
Through a pneumatic piston the trolley fastens the piece and puts it under a 250 mm diameter diamond wheel; the wheel is located on the hone and is equipped with a camber system to ensure the right cutting angle.
Through a pneumatic piston the trolley fastens the piece and puts it under a 250 mm diameter diamond wheel; the wheel is located on the hone and is equipped with a camber system to ensure the right cutting angle.
The controls are placed outside the locker and a control board allows to set up or recall programmes, move the machine manually, control capabilities or set speeds.
The axis movements are hydraulic and controlled by electronic systems.
The machine can perform programmes independently, set-up was simplified so as not to need highly-specialized staff.
Axis may be controlled by CNC, which allows to make more complex geometric shapes.
Max standard pieces dimensions are 1500x600x 230.